|
TeleKit |
|
What's in a TeleKit?
The TeleKit comes with all the components plus the adhesive to construct a full featured truss telescope. It does not
include the primary mirror, secondary mirror, eyepieces or finder. What the TeleKit offers is an opportunity for you to
experience the pride and satisfaction of building your own, top-quality telescope. It's easy for an individual to
spend more attention to detail and more time on fine finishing than commercial suppliers. You can also customize the
design and feel confident adding any options desired. AstroSystems supplies all the hard to find or fabricate
components, including a light shroud for the trusses and 10" transport wheels and handles. They also supply all the
precision cut wood components which are routed with CNC technology. Only the highest quality stainless steel hardware
is included.
Can I get a pre-built TeleKit?
Do you like all the outstanding features of the AstroSystems TeleKit but don't have the time, space or inclination to
build one? Not a problem! We now offer completely finished TeleKits in selected sizes.
Ultra-smooth, four coat polyurethane finish offers unsurpassed protection. We use specially formulated penetrant/water
resistant primer and 3 topcoats of premium polyurethane for unsurpassed water resistance and durability.
Truss telescopes may look alike from a distance, but the beautiful golden blonde Baltic Birch complimented by the
black accents always stands out among Truss Newtonians. The closer you look, the more obvious the superior the
workmanship, finish and performance becomes. Sky and Telescope magazine called the TeleKit a "heirloom Dobsonian"
in their June 1998 review. Ready to drop in your optics, or we can supply optics from recommended opticians.
Why the TeleKit is the most advanced truss telescope on the market
| QuickSwitch |
Filter Slide Integrated in the TeleKit with the Phase 4 Focuser or optional Feathertouch focuser.
The four position slide makes it a snap to change filters with a twist of the control knob. No more removal of the
eyepiece and thread miss-match. One of the most powerful observing aids is now at your fingertips. It is that quick,
easy, and SAFE! The filter slide has been modified for compatibility with 2" Bino-viewers and laser collimators
to protrude through the slide for proper function.
|
| Astrosystems Spider and Secondary Holder |
This time tested assembly is rock-solid and has four collimation screws
(thumb screws for 2.6" and up) for fast, easy and precise collimation every time. Compatible with AstroSystems DewGuard.
|
| Cooling Fans and Rechargeable Batteries |
Cooling fans are incorporated into the mirror cell and come complete
with gel-cell batteries, AC and DC chargers. High capacity fans feature brushless, ball bearing construction so they
can be used while observing without image vibration. |
| Upper Truss Fasteners |
Easy, no-tool 4 point cam action is fast and positive. Four pairs of
trusses are much easier to handle than eight loose trusses. |
| Stainless steel hardware |
Stainless steel is used throughout with the exception of some internal
fasteners, providing strength and corrosion protection. |
| Construction |
Both the rocker box and mirror box are constructed with finger jointed
Baltic Birch plywood, a professional and durable joint. Slow cure epoxy is used for the ultimate in strength. Baltic
Birch plywood has a single sheet of veneer so no unsightly veneer seams. |
| Altitude Bearings |
Ultra smooth large radius bearings that move on one teflon and one ball
bearing per side. Drive and DSC compatible. Fingertip motion and complete control of resistance. |
| Mirror Cell |
The easy access tailgate assembly allows quick access to the primary
mirror. Just remove the two bolts to drop down the mirror cell to clean or remove the mirror. This makes installing
and removing the mirror much safer, especially for large optics. The mirror transport system protects the primary
mirror and flotation assembly by supporting the primary mirror on cushioned pads. The cushioned stainless steel sling
insures accurate collimation by maintaining the primary mirror position. With hundreds of TeleKits in the field, this
support method has proved to be the optimum method of primary mirror support to achieve the best planetary resolution
and deep-sky images. |
| Azimuth Bearing |
Three sets of sealed ball bearings ride on stainless steel axles. Low
maintenance and zero backlash. The adjustable brake is standard. |
| Truss Tubes |
Telekits are supplied with 6061-T6 seamless aluminum trusses. They are
protected with a black, heat shrink protective coating. The light shroud, a $100.00 option with most truss telescopes
sold, is a TeleKit standard feature. |
| Upper Cage |
The upper cage is light, strong and can be stored in the mirror box. This
feature provides safer and more compact transportation. |
| Lower Clamp Blocks |
Located inside the mirror box for an uncluttered look. They are strong
and precise and require no tools. |
A TeleKit includes:
- Upper Cage rings, spacers, glue dowels and double-sided tape
- Light Baffle
- Phase 4 focuser or the optional Feathertouch focuser and hardware
- Spider and mounting hardware
- Secondary Holder
- Upper Truss Fasteners with cam hardware
- 5 position filter slide, pre-assembled with mounting hardware
- Primary mirror mount and hardware
- Primary mirror cooling fan with gel-cell batteries and chargers
- Lower Truss Tube Clamps with mounting template
- Altitude Bearings, teflon and roller altitude bearings and hardware
- Lycra light shroud
- Truss tubes with black polyolefin coating
- Mirror Box
- Rocker Box with bottom laminate
- Pivot bolt, pre-drilled for setting circles
- Ground board with feet
- Azimuth roller bearings, azimuth brake and axles
- Transport handles, wheels and hardware
For assembly:
- Glue spacer for rocker and mirror box
- Lower clamp block glue template
- Epoxy glue kit with stirrers, application brushes, gloves and beakers
- Scrap Baltic Birch plywood for sanding, routing and finishing practice
-
Scrap plastic sheet for mixing small amounts of glue or as a cutting mat
|
|
 |
| Displaying 1 to 15 (of 38 products) |
Result Pages: 1 |
| |
Product Name+ |
Manufacturer |
Price |
 |
Finished TK-12.5 (Item #TK-12.5_fini)
|
AstroSystems |
$2,200.00
|
| |
Finished TK-12.5 with Discovery mirror (Item #TK-12.5_fin_)
|
AstroSystems |
$3,575.00
|
| |
Finished TK-12.5 with Pegasus mirror (Item #TK-12.5_fin_)
|
AstroSystems |
$3,575.00
|
| |
Finished TK-13.1 (Item #TK-13.1_fini)
|
AstroSystems |
$2,200.00
|
| |
Finished TK-14.5 (Item #TK-14.5_fini)
|
AstroSystems |
$2,500.00
|
| |
Finished TK-14.5 with Pegasus mirror (Item #TK-14.5_fin_)
|
AstroSystems |
$4,000.00
|
| |
Finished TK-15 (Item #TK-15_finish)
|
AstroSystems |
$2,650.00
|
| |
Finished TK-15 with Discovery mirror (Item #TK-15_fin_di)
|
AstroSystems |
$4,000.00
|
| |
Finished TK-16 (Item #TK-16_finish)
|
AstroSystems |
$2,850.00
|
| |
Finished TK-16 with Pegasus mirror (Item #TK-16_fin_pe)
|
AstroSystems |
$4,800.00
|
| |
Finished TK-17.5 (Item #TK-17.5_fini)
|
AstroSystems |
$3,250.00
|
| |
Finished TK-17.5 with Discovery mirror (Item #TK-17.5_fin_)
|
AstroSystems |
$4,800.00
|
| |
Finished TK-18 (Item #TK-18_finish)
|
AstroSystems |
$3,250.00
|
| |
Finished TK-18 with Pegasus mirror (Item #TK-18_fin_pe)
|
AstroSystems |
$5,825.00
|
| |
Finished TK-20 (Item #TK-20_finish)
|
AstroSystems |
$3,650.00
|
| Displaying 1 to 15 (of 38 products) |
Result Pages: 1 |
|
|
|
My Account | 
Cart | 
Checkout 
